ここでは、すでに説明した設定ファイルの他に必要な、
3 個のファイルを示します。
これは stage_1.sh
スクリプトです。内容を変更する必要はないでしょう。
#!/bin/sh
#
# stage_1.sh - FreeBSD From Scratch, 第 1 段階: システムのインストール
# 使い方: ./stage_1.sh profile
# 読み込むファイル: ./stage_1.conf.profile
# 書き出すファイル: ./stage_1.log.profile
#
# 著者: Jens Schweikhardt
# $Id: stage_1.sh,v 1.2 2006-03-13 16:46:15 rushani Exp $
# $FreeBSD: release/9.2.0/ja_JP.eucJP/articles/fbsd-from-scratch/stage_1.sh 38826 2012-05-17 19:12:14Z hrs $
# Original revision: 1.5
PATH=/bin:/usr/bin:/sbin:/usr/sbin
# 前提とする環境:
#
# a) "make buildworld" と "make buildkernel" が正常に終了していること。
# b) 未使用パーティションがあること (ルートファイルシステム用に少なくとも 1 個、
# 好みに応じて /usr や /var 用のものを用意する)
# c) カスタマイズされた stage_1.conf.profile ファイル。
if test $# -ne 1; then
echo "usage: stage_1.sh profile" 1>&2
exit 1
fi
# ---------------------------------------------------------------------------- #
# ステップ 1: $DESTDIR 以下に空のディレクトリツリーを作成
# ---------------------------------------------------------------------------- #
step_one () {
create_file_systems
# ここで他のすべてのディレクトリを作成。必須。
cd ${SRC}/etc; make distrib-dirs DESTDIR=${DESTDIR}
}
# ---------------------------------------------------------------------------- #
# ステップ 2: /etc ディレクトリツリーと / にファイルを追加
# ---------------------------------------------------------------------------- #
step_two () {
copy_files
# mergemaster の作業ファイルがあれば削除。
TEMPROOT=/var/tmp/temproot.stage1
if test -d ${TEMPROOT}; then
chflags -R 0 ${TEMPROOT}
rm -rf ${TEMPROOT}
fi
export MAKEDEVPATH="/bin:/sbin:/usr/bin"
mergemaster -i -m ${SRC}/etc -t ${TEMPROOT} -D ${DESTDIR}
cap_mkdb ${DESTDIR}/etc/login.conf
pwd_mkdb -d ${DESTDIR}/etc -p ${DESTDIR}/etc/master.passwd
# mergemaster は /var/log に置かれる空ファイルを作成しないので、
# ここで作成。ただし copy_files でコピーされている場合は、それを使う。
cd ${TEMPROOT}
find . -type f | sed 's,^\./,,' |
while read f; do
if test -r ${DESTDIR}/${f}; then
echo "${DESTDIR}/${f} already exists; not copied"
else
echo "Creating empty ${DESTDIR}/${f}"
cp -p ${f} ${DESTDIR}/${f}
fi
done
chflags -R 0 ${TEMPROOT}
rm -rf ${TEMPROOT}
}
# ---------------------------------------------------------------------------- #
# ステップ 3: installworld を実行する
# ---------------------------------------------------------------------------- #
step_three () {
cd ${SRC}
make installworld DESTDIR=${DESTDIR}
# 追加の互換ライブラリをインストールする (オプション)。libc.so.4 を
# 動的リンクするプログラムがあれば、つまり、
# /usr/libexec/ld-elf.so.1: Shared object "libc.so.4" not found
# というエラーメッセージが見つかったら、これを利用すること。
cd lib/compat/compat4x.i386
make all install DESTDIR=${DESTDIR}
}
# ---------------------------------------------------------------------------- #
# ステップ 4: カーネルとモジュールをインストールする
# ---------------------------------------------------------------------------- #
step_four () {
cd ${SRC}
# installkernel ターゲットには、loader.conf と device.hints が必要。
# ステップ 2 でコピーしていなければ、次の 2 行を使ってコピーすること。
# cp sys/boot/forth/loader.conf ${DESTDIR}/boot/defaults
# cp sys/i386/conf/GENERIC.hints ${DESTDIR}/boot/device.hints
make installkernel DESTDIR=${DESTDIR} KERNCONF=${KERNCONF}
}
# ---------------------------------------------------------------------------- #
# ステップ 5: /etc/fstab とタイムゾーン情報のインストール
# ---------------------------------------------------------------------------- #
step_five () {
create_etc_fstab
# タイムゾーンの設定。ほとんどの場合は必須。
cp ${DESTDIR}/usr/share/zoneinfo/${TIMEZONE} ${DESTDIR}/etc/localtime
if test -r /etc/wall_cmos_clock; then
cp -p /etc/wall_cmos_clock ${DESTDIR}/etc/wall_cmos_clock
fi
}
# ---------------------------------------------------------------------------- #
# ステップ 6: 残りのカスタマイズ
# ---------------------------------------------------------------------------- #
step_six () {
all_remaining_customization
}
do_steps () {
echo "PROFILE=${PROFILE}"
echo "DESTDIR=${DESTDIR}"
echo "SRC=${SRC}"
echo "KERNCONF=${KERNCONF}"
echo "TIMEZONE=${TIMEZONE}"
echo "TYPE=${TYPE}"
echo "REVISION=${REVISION}"
echo "BRANCH=${BRANCH}"
echo "RELDATE=${RELDATE}"
step_one
step_two
step_three
step_four
step_five
step_six
}
# ---------------------------------------------------------------------------- #
# ここから実行開始
# ---------------------------------------------------------------------------- #
PROFILE="$1"
set -x -e -u # エラーが発生するか未定義変数を使用したら停止する。
. ./stage_1.conf.${PROFILE}
# world を make するのに使われたソースコードから変数をいくつか決定する。
# この変数は、たとえば 4.x と 5.x どちらのシステムをインストールするの
# かといった動作を変更するのに使われる。RELDATE に対する
# __FreeBSD_version は Port 作成者のためのハンドブック (Porter's Handbook)
# で説明されている。
# doc/en_US.ISO8859-1/books/porters-handbook/freebsd-versions.html
# 日本語版もあるが、最新の情報は英語版を参照のこと。
# doc/ja_JP.eucJP/books/porters-handbook/freebsd-versions.html
# 形式は、<メジャー番号><マイナー番号 2 桁><リリースブランチなら 0, それ以外は 1>xx
# 結果は次のようなものになる。
#
# TYPE="FreeBSD"
# REVISION="4.9"
# BRANCH="RC" { "CURRENT", "STABLE", "RELEASE" }
# RELDATE="502101"
#
eval $(awk '/^(TYPE|REVISION|BRANCH)=/' ${SRC}/sys/conf/newvers.sh)
RELDATE=$(awk '/^[ \t]*#[ \t]*define[ \t][ \t]*__FreeBSD_version[ \t]/ {
print $3
}' ${SRC}/sys/sys/param.h)
echo "=> Logging to stage_1.log.${PROFILE}"
do_steps 2>&1 | tee stage_1.log.${PROFILE}
# vim: tabstop=2:expandtab:shiftwidth=2:
# EOF $RCSfile: stage_1.sh,v $
ダウンロード: stage_1.sh
.
これは stage_2.sh
スクリプトです。最初の部分にある変数を変更しましょう。
#!/bin/sh
#
# stage_2.sh - FreeBSD From Scratch, 第 2 段階: ports のインストール
# 使い方: ./stage_2.sh [-hnp] configname
#
# 著者: Jens Schweikhardt
# $Id: stage_2.sh,v 1.2 2006-03-13 16:46:15 rushani Exp $
# $FreeBSD: release/9.2.0/ja_JP.eucJP/articles/fbsd-from-scratch/stage_2.sh 38826 2012-05-17 19:12:14Z hrs $
# Original revision: 1.5
DBDIR="/var/db/pkg"
PORTS="/usr/ports"
: ${PACKAGES:=${PORTS}/packages}
LOGDIR="/home/root/setup/ports.log"; mkdir -p ${LOGDIR}
PKG_PATH="/cdrom/packages/All:/dvd/packages/All"
PKG=
MYNAME="$(basename $0)"
usage () {
exec >&2
echo "usage: ${MYNAME} [-hnp] configname"
echo ""
echo " Options:"
echo " -h Print this help text."
echo " -n Dryrun: just show what would be done."
echo " -p Install a precompiled package if one can be found."
echo ""
echo " The config file (stage_2.conf.configname) is a list of"
echo " ports to install with one entry per line. Each line"
echo " consists of two or three space separated fields:"
echo " category, port, and optionally a build command."
echo ""
exit 1
}
# これらの場所にあるパッケージを順に探す。
# 1 つ見つかり次第戻って、結果を標準出力に表示する。
#
# ${PORTS}/${CATEGORY}/${NAME}
# ${PACKAGES}/All
# ${PACKAGES}/${CATEGORY}
# ${PKG_PATH}
#
find_package () {
echo "${PORTS}/${CATEGORY}/${NAME}:${PACKAGES}/All:${PACKAGES}/${CATEGORY}:${PKG_PATH}" |
tr : '\n' |
while read d; do
test -d "${d}" || continue
PKG=$(ls ${d}/${PKGNAME}.* 2>/dev/null)
test $? -eq 0 && echo "${PKG}" && return
done
}
#
# コマンドライン引数を処理する。
#
args=`getopt hnp $*`
if test $? != 0; then
usage
fi
set -- $args
DRYRUN=
CHKPKG=
for i; do
case "$i" in
-n) DRYRUN="yes"; shift;;
-p) CHKPKG="yes"; shift;;
--) shift; break;;
*) usage;;
esac
done
if test $# -eq 1; then
DATAFILE="$1"
else
usage
fi
#
# ports 一覧に対して繰り返す。
#
while read CATEGORY NAME CMD; do
case "${CATEGORY}" in
\#*) continue;;
'') continue;;
esac
DIR="${PORTS}/${CATEGORY}/${NAME}"
if ! test -d "${DIR}"; then
echo "$DIR does not exist -- ignored"
continue
fi
cd ${DIR}
PKGNAME=`make -V PKGNAME`
if test -n "${CHKPKG}"; then
PKG=$(find_package)
else
PKG=""
fi
if test -d "${DBDIR}/${PKGNAME}"; then
echo "${CATEGORY}/${NAME} already installed as ${PKGNAME}"
continue
fi
LOG="${LOGDIR}/${CATEGORY}+${NAME}"
echo "===> Installing ${CATEGORY}/${NAME}; logging to ${LOG}"
test -n "${CMD}" || CMD="make install BATCH=yes < /dev/null"
if test -n "${DRYRUN}"; then
if test -n "${PKG}"; then
echo pkg_add -v ${PKG}
else
echo "${CMD}"
fi
continue
fi
date "++++ Started %v %T +++" > ${LOG}
STARTED=$(date +%s)
(
if test -n "${PKG}"; then
echo "Found package ${PKG}"
pkg_add -v ${PKG}
else
echo "CMD: ${CMD}"
make clean
eval "${CMD}"
make clean # ${PORTS} 以下のディスク容量がすくなければコメントをはずす
fi
) 2>&1 | tee -a ${LOG}
FINISHED=$(date +%s)
DURATION=$(dc -e "${FINISHED} ${STARTED} - p")
date "++++ Finished %v %T after ${DURATION} secs +++" >> ${LOG}
done < stage_2.conf.${DATAFILE}
# vim: tabstop=4:
# EOF $RCSfile: stage_2.sh,v $
ダウンロード: stage_2.sh
.
これは、わたしが使っている stage_3.mk
です。
設定を自動的におこなうための手順を、ここに入れます。
# stage_3.mk - FreeBSD From Scratch, 第 3 段階: ports をインストールした後の設定
# Usage: make -f stage_3.mk all (すべての設定を行なう)
# or make -f stage_3.mk target (target の設定を行なう)
#
# 著者: Jens Schweikhardt
#
# すべての target が、複数回実行しても悪影響をおよぼさないように
# 確認しておくとよい。
#
# $Id: stage_3.mk,v 1.2 2006-03-13 16:46:15 rushani Exp $
# $FreeBSD: release/9.2.0/ja_JP.eucJP/articles/fbsd-from-scratch/stage_3.mk 38826 2012-05-17 19:12:14Z hrs $
# Original revision: 1.4
.POSIX:
message:
@echo "Please use one of the following targets:"
@echo "config_apache"
@echo "config_firefox"
@echo "config_inn"
@echo "config_javaplugin"
@echo "config_nullplugin"
@echo "config_privoxy"
@echo "config_smartd"
@echo "config_sudo"
@echo "config_TeX"
@echo "config_tin"
@echo "config_uucp"
@echo "all -- all of the above"
all: \
config_apache \
config_firefox \
config_inn \
config_javaplugin \
config_nullplugin \
config_privoxy \
config_smartd \
config_sudo \
config_TeX \
config_tin \
config_uucp
config_apache:
# 1. httpd.conf の変更
perl -pi \
-e 's/^\s*ServerAdmin.*/ServerAdmin schweikh\@schweikhardt.net/;' \
-e 's/^\s*Listen.*/Listen 127.0.0.1:80/;' \
-e 's/^\s*StartServers.*/StartServers 2/;' \
-e 's/^\s*MinSpareServers.*/MinSpareServers 2/;' \
-e 's,/usr/local/www/cgi-bin/,/home/opt/www/cgi-bin/,;' \
/usr/local/etc/apache2/httpd.conf
# 2. ウェブページに対するシンボリックリンクの作成
cd /usr/local/www/data; \
ln -fs /home/schweikh/prj/homepage schweikhardt.net; \
ln -fs /home/opt/www/test .
# httpd.conf が変更されていないか確認する。
@if ! cmp -s /usr/local/etc/apache2/httpd.conf httpd.conf; then \
echo "ATTENTION: the httpd.conf has changed. Please examine if"; \
echo "the modifications are still correct. Here is the diff:"; \
diff -u /usr/local/etc/apache2/httpd.conf httpd.conf; \
fi
if test -f /var/run/httpd.pid; then \
/usr/local/etc/rc.d/apache2.sh stop; \
/usr/local/etc/rc.d/apache2.sh start; \
else \
/usr/local/etc/rc.d/apache2.sh start; \
fi
config_firefox:
# wheel グループが書き込めるようにして、すべての extension をインストー
# ルできるようにする。
chmod -R g+w /usr/X11R6/lib/firefox/lib/mozilla-1.6/chrome
config_inn:
pw usermod -n news -d /usr/local/news -s /bin/sh
mkdir -p /share/news/spool/outgoing \
/share/news/spool/incoming \
/share/news/spool/articles \
/share/news/spool/overview \
/share/news/spool/tmp \
/share/news/db
chown -R news:news /share/news
# ニュースシステムの初期設定
cd /home/root/setup; \
if test ! -f /share/news/db/active; then \
echo "installing /share/news/db/active"; \
install -C -o news -g news -m 664 active /share/news/db; \
fi; \
if test ! -f /share/news/db/newsgroups; then \
echo "installing /share/news/db/newsgroups"; \
install -C -o news -g news -m 664 newsgroups /share/news/db; \
fi
# port の innd.sh は壊れていて、
# 存在しない history.pag をチェックしようとする。
cd /home/root/setup; \
install -C -o root -g wheel -m 555 innd.sh /usr/local/etc/rc.d
# 格納方法の設定
cd /home/root/setup; \
printf "%s\n%s\n%s\n%s\n" \
"method tradspool {" \
" newsgroups: *" \
" class: 0" \
"}" \
>storage.conf; \
install -C -o news -g news -m 664 storage.conf /usr/local/news/etc
# newsfeeds の設定
printf "%s\n%s\n" \
"ME:*::" \
"shuttle/news2.shuttle.de:!junk,!control:B32768/512,Tf,Wfb:" \
>/usr/local/news/etc/newsfeeds
# inn.conf の設定
perl -pi \
-e 's/^#*\s*(organization:\s*).*/$$1"An Open Pod Bay Door"/;' \
-e 's/^#*\s*(pathhost:\s*).*/$$1hal9000.schweikhardt.net/;' \
-e 's/^#*\s*(server:).*/$$1 localhost/;' \
-e 's/^#*\s*(domain:).*/$$1 schweikhardt.net/;' \
-e 's/^#*\s*(fromhost:).*/$$1 schweikhardt.net/;' \
-e 's,^#*\s*(moderatormailer:).*,$$1 \%s\@moderators.isc.org,;' \
-e 's,^#*\s*(pathdb:\s*).*,$$1/share/news/db,;' \
-e 's,/usr/local/news/spool,/share/news/spool,;' \
/usr/local/news/etc/inn.conf
# 履歴が全く存在しなければ、空の履歴を作成する。
# /usr/ports/news/inn-stable/Makefile の post-install 参照。
cd /share/news/db; \
if test ! -f history; then \
touch history; \
chmod 644 history; \
chown news:news history; \
su -fm news -c "/usr/local/news/bin/makedbz -i"; \
for s in dir hash index; do \
mv history.n.$${s} history.$${s}; \
done; \
fi
# send-uucp を設定する。
echo shuttle:shuttle >/usr/local/news/etc/send-uucp.cf
# inncheck を満足させる。
cd /usr/local/news/etc; \
chown news:news *; \
chmod 640 control.ctl expire.ctl nntpsend.ctl readers.conf
/usr/local/news/bin/inncheck
# inn.conf が変更されていないか確認する。
@if ! cmp -s /usr/local/news/etc/inn.conf inn.conf; then \
echo "ATTENTION: the inn.conf has changed. Please examine if"; \
echo "the modifications are still correct. Here is the diff:"; \
diff -u /usr/local/news/etc/inn.conf inn.conf; \
fi
if ! test -f /usr/local/news/run/innd.pid; then \
/usr/local/etc/rc.d/innd.sh start; \
fi
config_javaplugin:
# Mozilla Firefox:
cd /usr/X11R6/lib/firefox/lib/mozilla-1.6/plugins; \
ln -fs /usr/local/jdk1.4.2/jre/plugin/i386/ns610/libjavaplugin_oji.so
# Plain Mozilla:
#cd /usr/X11R6/lib/mozilla/plugins; \
#ln -fs /usr/local/jdk1.4.2/jre/plugin/i386/ns610/libjavaplugin_oji.so
# nullplugin を邪魔にならないように削除する。また、.mozilla/*/*/prefs.js に
# 次の項目を追加する。
# user_pref("plugin.display_plugin_downloader_dialog", false);
# これで入手できないプラグイン (flash 等) についてポップアップダイアログが
# 出ないようになる。
config_nullplugin:
find /usr/X11R6/lib -name libnullplugin.so -exec mv {} {}.orig \;
config_privoxy:
install -C -o root -g wheel -m 644 conf/privoxy/config \
/usr/local/etc/privoxy
install -C -o root -g wheel -m 755 conf/privoxy/privoxy.sh \
/usr/local/etc/rc.d
/usr/local/etc/rc.d/privoxy.sh restart
config_smartd:
cp smartd.sh /usr/local/etc/rc.d/smartd.sh
cp smartd.conf /usr/local/etc/smartd.conf
config_sudo:
if ! grep -q schweikh /usr/local/etc/sudoers; then \
echo 'schweikh ALL = (ALL) NOPASSWD: ALL' >> /usr/local/etc/sudoers; \
fi
config_TeX:
# textproc/docproj では、FreeBSD ハンドブックを JadeTeX で
# タイプセットするには、次の値を設定するよう指示されている
perl -pi \
-e 's/^% original texmf.cnf/% texmf.cnf/;' \
-e 's/^(hash_extra\s*=\s*).*/$${1}60000/;' \
-e 's/^(pool_size\s*=\s*).*/$${1}1000000/;' \
-e 's/^(max_strings\s*=\s*).*/$${1}70000/;' \
-e 's/^(save_size\s*=\s*).*/$${1}10000/;' \
/usr/local/share/texmf/web2c/texmf.cnf
# texmf.cnf が変更されていないか確認する。
@if ! cmp -s /usr/local/share/texmf/web2c/texmf.cnf texmf.cnf; then \
echo "ATTENTION: the texmf.cnf has changed. Please examine if"; \
echo "the modifications are still correct. Here is the diff:"; \
diff -u /usr/local/share/texmf/web2c/texmf.cnf texmf.cnf; \
fi
config_tin:
# tin が設定したファイルを読むように設定
printf "%s\n%s\n%s\n" \
"activefile=/share/news/db/active" \
"newsgroupsfile=/share/news/db/newsgroups" \
"spooldir=/share/news/spool/articles" \
>/usr/local/etc/tin.defaults
config_uucp:
cd /etc/mail; make install SENDMAIL_MC=/etc/mail/hal9000.mc
# su(1) が動作するように uucp ユーザのシェルを正しい uucico にする。
chpass -s /usr/local/libexec/uucp/uucico uucp
# UUCP が /usr/bin/rnews を見つけられるようにする
cd /usr/bin; ln -fs ../local/news/bin/rnews .
# 実際の UUCP の設定
echo nodename js2015 > /usr/local/etc/uucp/config
echo shuttle js2015 `cat uucp` > /usr/local/etc/uucp/call
printf 'port tcp\ntype tcp\n' > /usr/local/etc/uucp/port
printf "%s\n%s\n%s\n%s\n%s\n%s\n%s\n" \
"call-login *" \
"call-password *" \
"time any" \
"system shuttle" \
"address mail.s.shuttle.de" \
"commands rmail rnews" \
"port tcp" \
>/usr/local/etc/uucp/sys
cd /usr/local/etc/uucp; chown uucp:uucp *; chmod o-rwx *
# 起動後に uucico を実行する
mkdir -p /usr/local/etc/rc.d; cp uucp.sh /usr/local/etc/rc.d
# vim: tabstop=4:
# EOF $RCSfile: stage_3.mk,v $
ダウンロード: stage_3.mk
.